Portable 6 Ton Hydraulic Hole Punching Machine Manual Metal Hole Digger Punch US

Description

Description This Hydraulic Hole Punching Machine Is Made of High-quality Steel and Plastic, Which Is Strong, Durable, and Not Easy to Deform. It Has a Tonnage of 6t/2204lbs, Which Is Large Enough to Meet Your Daily Needs. It Is Suitable for Processing Stainless Steel Tubes Within 1 Mm/0.03inch and Iron Plates Within 1.5 Mm/0.05inch. Key Features Good Materials: This Hydraulic Hole Punching Machine Is Made of High-quality Steel and Plastic, Which Is Strong, Durable, and Not Easy to Deform. High-quality Materials Can Improve the Service Life of the Product. Trouble-free Usage: the 2.76" Throat Depth of the Hydraulic Punch Greatly Expands the Range of Distance, and the Oil Return Bolt Achieves Fast Pressure Relief.
Welcome
Description
This Hydraulic Hole Punching Machine Is Made of High-quality Steel and Plastic, Which Is Strong, Durable, and Not Easy to Deform. It Has a Tonnage of 6t/2204lbs, Which Is Large Enough to Meet Your Daily Needs. It Is Suitable for Processing Stainless Steel Tubes Within 1 Mm/0.03inch and Iron Plates Within 1.5 Mm/0.05inch.
Key Features
Good Materials:
This Hydraulic Hole Punching Machine Is Made of High-quality Steel and Plastic, Which Is Strong, Durable, and Not Easy to Deform. High-quality Materials Can Improve the Service Life of the Product.
Trouble-free
Usage:
the 2.76" Throat Depth of the Hydraulic Punch Greatly Expands the Range of Distance, and the Oil Return Bolt Achieves Fast Pressure Relief.
Sufficient Tonnage:
This Product Has a Tonnage of 6t/2204lbs, Which Is Large Enough to Meet Your Daily Needs.
Easy to Operate:
You Only Need to Swing the Handle Back and Forth and It Can Start Working, Which Is Very Easy to Operate.
Comfortable Grip:
It Has a Vertical Grain Type Plastic Handle, Which Is Anti-slip and More Comfortable to Hold. You Don't Get Tired Even If You Hold It for a Long Time.
Easy to Clean:
the Surface of the Product Is Smooth and Flat, Which Is Very Easy to Clean. You Just Need to Wipe It with a Wet Rag.
Complete
Punching Die
s:
It Is Equipped with 5 Different Sized Punching Dies. You Can Choose Freely According to Your Needs, and It Is More Convenient to Use.
Easy to Carry:
This Product Is Equipped with a Toolbox. the Product and Accessories Can Be Neatly Placed in the Toolbox. You Can Avoid Losing Small Accessories, Which Is Convenient and Easy for You to Carry.
Guaranteed Customer Service:
We Aim to Provide Quality Products and Services. If You Have Problems, Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible.
Details
Auxiliary Rubber:
This Product Is Equipped with an Auxiliary Rubber, Which Can Help the Convex Die Return to Its Original Position by the Action of the Rubber and Piston Spring and Make It More Convenient to Use.
Rotary Switch:
with the Rotary Switch, You Can Flexibly and Quickly Realize the Pressurization and Pressure Relief, Which Is Easier for You to Operate.
Plastic Handle:
Its Handle Is Made of Plastic, Which Is Ergonomically Designed and Very Comfortable to Use.
Thickened Plier Head:
Different from the Ordinary Plier Head, the Plier Head of This Product Is Thickened, Which Can Extend the Service Life of the Product.
Oil Sealing Rubber Ring
: It Is Equipped with Oil Sealing Rubber Rings, Which Can Prevent Oil Leakage and Make It Safer to Use.
Application
It Is Suitable for Processing Stainless Steel Plates Within 1 Mm/0.03inch and Iron Plates Within 1.5 Mm/0.05inch.
Specification
Model: Syd-25
Color: Black, Yellow
Material: Plastic, Steel
Operation Mode: Hydraulic
Power Source: Hand Powered
Throat Depth: 70mm/2.76inch
Tonnage: 6t/2204lbs
Opening Capacity: Stainless Steel Plate Within 1mm/0.03inch, Iron Plate Within 1.5mm/0.05inch
Opening Range: 16-25mm/0.6-0.9inch
Dies Size: Φ16/0.63", Φ18/0.71", Φ20/0.79", Φ22/0.87", Φ25/0.98"
Product Size: 13.5*6*34cm/5.3*2.4*13.6inch
Package Weight: 4.2kg/9.26lbs
Package Size: 43*10*19cm/16*3*7inch
Package Included
1* Hydraulic Hole Punching Machine
1* Wrench
1* Toolbox
4* Punching Dies
1* Manual
5* Oil Seal Rubber Rings
Notes
Please Tighten the Set Screw Before Use.
Please Note That the 25mm Punching Die Has Been Installed on the Machine.
The Fixing Handle Contains Oil Pockets.
The Upper and Lower Punching Dies Must Correspond to Each Other Before Opening the Holes. the Edge Should Be 25mm/0.98inch from the Center of the Hole.
The Oil Bag Is Filled with Hydraulic Oil No. 20. If You Find That the Hydraulic Oil Is Not Enough After a Long Period of Use, You Can Add Oil by Unscrewing the Bag Counterclockwise and Removing the Rubber Plug at the End of the Bag.
After the Hole Is Opened, You Should Stop the Pressure. Continued Pressure Will Damage the Rubber.
Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Oct 2, 2022 at 02:01:21 PDT, seller added the following information: