OSD Electronic Reticle KIT, +6V-20V, Voltmeter, MAX7456 nightvision Hunting DIY

Description

- OSD3 Controller a
llows you to use 35 different reticles.
- Just one push to switch the
reticles
.
- 10 memory cells for
reticles
form and the screen coordinate
-  the battery check
Voltmeter
-  only 3 buttons to working
-
one push to switch to output for  black or  white cross-hair
- PAL - NTSC
OSD3 Controller is designed to overlay text and / or graphic information on a video image received from
an analog video camera (PAL / NTSC) and display this information on an LCD display or video finder.
Thus, the display will simultaneously display the image from the camera and text and graphic information from the controller.
OSD3 Controller is an integral part for building day and night sights.
The figure (Fig. 1) shows a typical connection.
The supply voltage:  from 6V till + 21V
PCB
dimension
: 32x29mm
The
program
allows you to move the
cross hair
on the screen ( +/- 15 pixels vertical and +/- 30 pixels horizontal ),
and  to save the coordinates into memory.
You can
preliminary
adjust till 10 different cross-hairs forms and coordinates.
LOT:
1pc PCB MAX7456
1pc
3
buttons
keyboard
1pc cable with 2pin connector for Power Supply
1pc cable with 4pin connector for Video IN and Video Out
Feel free to
connect
me  for
all details
:)
Please send me your
e-mail for
connection
instruction, if you need